Correct Answer: BC

Correct Answer: D

Correct Answer: D

Correct Answer: B

Correct Answer: B

B: Because secure transport was built taking hybrid networking into account, you can configure a private and public IP address. The public IP address relies on reachability over a network marked Public. This configurations allows the controller to first be reached over the private network and then the public network.

C: The management plane is configured on the SCC using SSL and SSH secured communications, in which you create and distribute the path selection policy. When a network is marked as securable, it indicates that the SteelHead will join a group of other SteelHeads that can encrypt traffic. The SCC pushes the path selection policy to all the SteelHeads.

Incorrect:

Not D: The configurations allows the controller to first be reached over the private network and then the

public network. The private and public IP addresses do not need to come from the same in-path interface.

With the stp-client controller in-path enable command, the data center SteelHead (DC-SH) uses the private

and public IP addresses from the same in-path interface, while the branch office SteelHead (BR-SH) uses

the private and public IP addresses from different in-path interfaces.

References:

https://support.riverbed.com/bin/support/static/mcmq1o68fbs27lqc5798c4p8m6/html/ak9u1

115aieef8qcb43mjgf98d/scc_9.2_dg_html/index.html#page/scc_deploy_9.2/secure_transp ort.html

Correct Answer: B

To configure the remote management port

*

Physically connect the REMOTE port to the network. You cable the remote management port to the

Ethernet

network in the same manner as the Primary interface.

*

Install the IPMItool on the client machine.

*

Assuming the IP address is 192.168.100.100, the netmask is 255.255.255.0, and the default gateway is

192.168.100.1, assign an IP address to the remote management port.

Etc.

References: Stingray Services Controller Command-Line Interface Reference Manual, Version 2.0, December 2014, page 201 http://www.brocade.com/content/dam/common/documents/content-types/command- reference-guide/ brocade-services-director-comamnd-line-interface-reference-manual.pdf

Correct Answer: A

Using Riverbed's unique MX-TCP functionality, combined with its Hierarchical Fair Service Curve (HSFC)

QoS technology, users are simultaneously guaranteed bandwidth for their virtual desktop connections and

some of the latency impact is mitigated. The results below show operational improvements for particularly

common user actions; results will certainly vary based on use case and network design.

Incorrect:

not B: Riverbed SkipWare adds another layer of optimization to WAN satellite links that have up to 10

times more latency than terrestrial WAN links. SkipWare users can be assured of the high performance,

scalability, flexibility, and DoD standards compliance necessary to keep federal, military, and commercial

satellite networks running at peak efficiency.

References: http://www.riverbed.com/document/fpo/WhitePaper-Riverbed-Desktop- Virtualization-andWAN.pdf

Correct Answer: ABC

References: https://support.riverbed.com/bin/support/static/lrj6rq1evg0fnm7pekuq3j2md1/html/vte4p5uj 2dkg9k1ukjv82835ci/sh_9.2_dg_protocols_html/index.html#page/sh_9.2_dg_protocols%2F ssl.html% 23ww206368

Correct Answer: B

1.6 Configure the Steelhead appliance to optimize Signed SMB and Encrypted MAPI 1.6.1 - Configuration steps for Signed SMB, Signed SMB2 and Signed SMB3 1.6.1.3 On the server-side Steelhead appliance, navigate to Configure > Optimization > SMB2.

1.6.1.4 Under the SMB Signing, check the `Enable SMB Signing' checkbox. 1.6.1.5 Next select the `Delegation Mode' radio button.

1.6.1.6 Click the `Apply' button.

1.6.1.7 No changes are needed on the client-side Steelhead appliance(s) unless SMB3 optimization is required.

References: Optimization in a Secure Windows Environment, White Paper , page 16 https:// support.riverbed.com/download.htm?filename=public/doc/technotes/Windows_secur ity_guide.pdf

Correct Answer: B

Configuring Endpoint Settings for Policies

You configure endpoint settings for SteelHead Mobile clients on the Endpoint Settings tab of the Manage >

Policies page.

Note: A policy is a set of optimization, security, location awareness, storage, and other configuration

settings that determine the optimization rules for the SteelHead Mobile clients. SteelHead Mobile clients

must have a policy and other endpoint-specific settings for optimization.

References: SteelCentral Controller for SteelHead, Mobile User's Guide, Version 4.8, April 2016, page 143

https://support.riverbed.com/bin/support/download?did=ponkltmr1vg9mv23ok2fmtgkj4