The network/ssh service is offline and you suspect that one of its configuration files may be missing. Which option will identify the missing file?

A. svcs l

B. svcs d

C. svcs D

D. svcs x

E. svcadm clear

F. viewing the network/ssh log file

You decide to create a new rights profile to include a selection of Solaris authorizations and commands. The commands in your selection will require extra privileges. Which two files will you modify to add these privileges and authorizations?

A. /etc/user_attr

B. /etc/security/auth_attr

C. /etc/security/prof_attr

D. /etc/security/exec_attr

E. /etc/security/prof_attr.d/core-os

F. /etc/security/auth_attr.d/core-os

Laura is a user and netadm is a role on a Solaris 11 system. You want to allow Laura to generate SSH keys. Which two steps should be taken?

A. Verify that netadm includes the Network Management profile.

B. Verify that laura has permission to access the Network Management profile.

C. Verify that the Network Management profile includes the netadm role.

D. Add a line for the ssh-keygen command to the file auth_attr.d/local-entries.

E. Add a line for the ssh-keygen command to the file exec_attr.d/local-entries.

You need to configure three zones.

zone1 will run an HTTP server, zone2 an application server, and zone3 a database.

zone1 must be accessible to clients on other systems.

zone2 and zone3 must not be accessible to the outside world. zone2 and zone3 must also communicate without going through zone1.

Identify the correct requirement.

A. zone1 will need a VNIC to connect to a physical Ethernet link.

B. zone1 will need at least two VNICs.

C. zone2 and zone3 will need a dedicated etherstub.

D. One etherstub will be necessary.

E. A flow is needed to filter HTTP requests to zone1.

You are about to configure resource controls for a nonglobal zone. You want to first examine settings as well as the system limits for those controls. Which command fetches this Information?

A. priocntl

B. zonecfg

C. rctladm D. prctl

Consider the following commands and output on the local server:

Also, consider the following route table entry on a remote system:

192.168.2.0 192.168.1.200 UG 1 1

You must configure a virtual switch to connect over net0 to the remote system. Select two commands that complete the configuration.

A. ipadm set-ifprop p forwarding=on net0

B. ipadn set-prop p forwarding=on vnic2

C. ipacim set-prop p forwarding=on ipv4

D. ipadm set-prop p routing=on net0

E. routeadm ue ipv4-forwarding

F. routeadm ue ipv4-routing

The following command is issued: pkg set-publisher P publisher2

What is the impact on your system?

A. makes the specified publisher sticky

B. makes the specified publisher the highest-ranked publisher

C. displays information about the specified publisher

D. moves the specified publisher one step higher in the search order

You detected a failure of net0 in the IPMP group named ips1. The server hosting the failed NIC supports dynamic reconfiguration. Which statement is true regarding the replacement of the hardware interface?

A. The NIC must be replaced with an identical physical interface card type.

B. The NIC will be configured after replacement with the dladm command.

C. The devfsadm command will be used to discover the replacement NIC.

D. The replacement NIC must occupy the same bus slot as the original NIC .

Which two statements correct regarding Link Aggregations?

A. The MAC address of the first configured link is used for all links.

B. A link with an existing IP interface cannot be added to an aggregation.

C. The switch must support the Link Aggregation Control Protocol (LACP).

D. Links of differing bit rates can be aggregated, but performance gains may not be realized.

E. The f option of dladm allows aggregating devices that do not support link state notification.

You are the primary administrator for a set of Oracle Solaris 11 servers. You noticed some changes to configuration files. Yon are concerned that someone may have unauthorized access cm that an authorized user may be abusing the access privilege. You want to track users of these systems to determine what tasks each user performs. Select the best way to gather this information.

A. Solaris auditing

B. the system/event service

C. the system-logging service

D. Basic Audit Reporting Tool

E. System Extended Accounting