The provisioning script automatically runs as part of the first boot-up of the Avaya Session Border Controller for Enterprise (SBCE). During this process you assign the Management IP address to the SBCE. You browse to the Element Management System (EMS) to continue to install the SBCE. On the System Management > Devices web page, which status does the SBCE display before the Install link is clicked?

A. Ready

B. Provisioned

C. Registered

D. Commissioned

You want to multiplex all remote workers SIP messages to Avaya Aura Session Manager (SM) over the same TCP connection, rather than open a dedicated TCP connection for each user. Which feature needs to be enabled for Avaya Session Border Controller for Enterprise (SBCE)?

A. the Enable Grooming feature in the Advanced tab of the Avaya Aura Session Manager (SM) Server Profile

B. the Enable Shared Control feature in the Signaling Interface.

C. the Stream Users Over Transport Link feature in the Signaling Interface

D. the Share Transport Link feature in the Advanced tab of the Avaya Aura Session Manager (SM) Server Profile

On Avaya Session Border Controller for Enterprise (SBCE), where do you access the tool that displays SIP messages, in real time, as they pass through the SBCE?

A. from Avaya Aura System Manager, navigate to "Session Border Controller for Enterprise>; SBCE Administration" menu

B. from the SBCE EMS Web Console

C. from the SBCE Server command line via SSH session, using PuTTY

D. from the traceSIP client installed on a local PC

In Avaya Session Border Controller for Enterprise (SBCE) 7.x, which two configuration screens must be configured for Personal Profile Management (PPM) to be successfully downloaded to an Avaya SIP Telephone (AST)? (Choose two.)

A. PPM Services Mapping Profile

B. Application Relay C. File Transfer

D. Reverse Proxy

You are setting up the SIP connection between Avaya Aura Messaging (AAM) and the Avaya Aura Core,

and the information you have entered for the Far-end connection is:

What should you conclude from all this information?

A. The connection cannot work because 5061 is not the Well-known port corresponding to TLS by standard.

B. There will be conflicts in the TLS connections given that 5061 is a well-known port that other Endpoints and Servers use within the same network.

C. A Security Certificate from the same Certificate Authority as the other Avaya Aura components, must be installed on the AAM Server to guarantee successful TLS Connections.

D. The IP address is wrong because its range does not correspond to a valid TLS-compatible IP address.

In Avaya Aura Messaging (AAM) 6.3, how many Call Answering Ports can one Application Server support?

A. up to 100 Ports

B. up to 10 Ports

C. up to 1000 Ports

D. up to 10000 Ports

By default, which Codec does Avaya Aura Messaging (AAM) support?

A. G.726

B. G.722

C. G.711

D. G.729

Which configuration must be completed before configuring a TSAPI link on Avaya Aura Application Enablement Services (AES)?

A. A CTI link must be configured on Avaya Aura Communication Manager (CM) first.

B. A Switch Connection must be configured on Avaya Aura Application Enablement Services (AES) first.

C. A signaling-group must be configured on Avaya Aura Communication Manager (CM) first.

D. A CTI-user must be configured on Avaya Aura Application Enablement Services (AES) first.

In which two locations is the Switch Password configured?

A. In `ip-services' form on Avaya Aura Communication Manager (CM) and in `TSAPI link' on Avaya Aura Application Enablement Services (AES)

B. In `ip-services' form on Avaya Aura Communication Manager (CM) and in `Switch Connection' on Avaya Aura Application Enablement Services (AES)

C. In `cti-link' form on Avaya Aura Communication Manager (CM) and in `Switch Connection' on Avaya Aura Application Enablement Services (AES)

D. In `cti-link' form on Avaya Aura Communication Manager (CM) and in `TSAPI link' on Avaya Aura Application Enablement Services (AES)

You are starting the process to create a server certificate so it can be installed in the Avaya Session

Border Controller (SBC).

What must be done before creating a server certificate for SBC?

A. Generate a Certificate Signing Request (CSR) in SBC.

B. Run initTM -d from SBC CLI.

C. Add End Entity in Session Manager.

D. Download a CA PEM file from System Manager.