A Linux host has been set up and successfully connected to the VNX array, but the local administrator cannot issue CLI commands. What is a possible explanation of this behavior?

A. The local administrator was not added to the host agent configuration file

B. The host is only connected to one SP on the VNX array.

C. The host agent must be stopped for the utility to work.

D. Linux iSCSI CHAP data was entered on the target, but not the initiators.

Which dependency will prevent a Virtual Network device from being deleted?

A. In use by another virtual device.

B. Has a host attached to it.

C. The VDM is in loaded state.

D. Has VLAN Tag assigned.

You are migrating a LUN within a VNX series array to an equal size LUN but with a different RAID type.

Which step is required to start using the new LUN?

A. Nothing. The migration process is non-disruptive.

B. Ensure the LUN is in the proper storage group at the time of cut-over

C. Ensure the size of the destination LUN is equal to or greater than the source LUN

D. Quiesce the host prior to final cut-over

Which RecoverPoint configuration details can be presented in report format when using Data Protection Advisor?

A. Replication sets

B. Replication lag

C. Link state change

D. RPA configuration changes

What are the available Usermapper roles?

A. Primary, Secondary, and Client

B. Primary, Local, and Remote

C. Local, Remote, and Client

D. Active, Passive, and Standby

You are asked to create the maximum number of writeable snapshots from a production file system per day, using equivalent intervals. How many snapshots can be created?

A. 16 -- one every 90 min

B. 24 -- one every 60 min

C. 48 -- one every 30 min

D. 96 -- one every 15 min

What does the acronym "CHAP" refer to?

A. Challenge Handshake Authentication Protocol

B. Challenge Handshake Authorization Protocol

C. CLARiiON Handshake Authentication

D. Consistent Host Application Protocol

Which method is used to configure Data Mover certificates?

A. In Unisphere, use the listed navigation (Server Certificates for File, Personas), select the desired VNX Data Mover and click the Generate button.

B. In Unisphere, use the listed navigation (Server Certificates for File, Personas), select the desired VNX Control Station and click the Properties button.

C. In Unisphere, use the listed navigation (Server Certificates for Block, Personas), select the desired VNX Control Station and click the Generate button.

D. In Unisphere, use the listed navigation (Server Certificates for Block, Personas), select the desired VNX Data Mover and click the Properties button.

What is the default user mapping method available to a VNX?

A. Usermapper

B. Microsoft SFU

C. VNX UNIX User Management

D. Local Files

What EMC software product contains a collection of tools that helps you perform basic hardware and software maintenance tasks on an EMC VNX Unified storage system?

A. Unisphere Service Manager (USM)

B. Navisphere Service Taskbar (NST)

C. CLARiiON Array Properties (CAP)

D. Unisphere Off Array Client