Which one of the following statements apply to the Free Space Estimator utility?
A. This utility determines if there is sufficient space on the secondary volume to perform a transfer
B. This utility determines if there is sufficient disk space available on the primary to perform an OSSV transfer
C. This utility run automatically after each transfer
D. This utility must be enabled on the secondary storage system
It is the use of the -Lflag in the snapmirror initialize command and the subsequent successful level 0 transfer that causes the destination volume to become snaplocke?
A. True
B. False
You cannot disable the SyncMirror license if one or more mirrored volumes exist.
A. True
B. False
Which command displays the disk ownership for both CPU modules in a FAS270C appliance?
A. disk show-v
B. disk display-r
C. disk own -s
D. vol status -r
You have connected all cables and disk shelves in a Fabric Attached MetroCluster. Which one of the following commands would you use to verify that disks are connected and have dual paths?
A. storage show disk-p
B. sysconfig -v
C. vol status -r
D. disk show
Which one of the following options will allow a snapmirror storage appliance to mirror from this system?
A. snapmirror. destination
B. optionssnapmirror.allow
C. snapmirror.access
D. optionssnapmirror.access host =
Which resource identifies the number of onboard ports available on an AFF/FAS controller?
A. Interoperability Matrix
B. Hardware Universe
C. BlueXP
D. ActiveIQ Config Advisor
Which three tools present statistics from the Data ONTAP counter manager? (Choose three.)
A. stats
B. sysstat
C. windowsperfmon
D. operations manager
After issuing the aggr split aggr0/plex0 aggrNew command ____________.
A. there is a newplex called aggrNew
B. thereare two new plexes, plex0 and plexNew
C. there is a new mirrored aggregate calledaggrNew
D. thereare two unmirrored aggregates, aggr0 and aggrNew
E. flexible volumes are evenly split between aggr0 andaggrNew
When cabling a standard storage appliance for SyncMirror. disk pool 1 volumes must be cabled to Fibre Channel adapter(s) located in what range of slots on the FAS960 appliance?
A. Slots 2 throiiandh 5
B. Slots 3 throuah 11
C. Slots 3 throuah 8
D. Slots S throuah 11