Connecting rods connect the piston to the __________.
A. flywheel
B. fuel pump
C. crankshaft
D. battery
When an engine runs on after the ignition key is turned off, it's called __________.
A. auto-ignition
B. sputtering
C. ignition recharge
D. ignition malfunction
Which is considered the left side of an engine?
A. The left side when you stand feeing the car in front.
B. The side that the starter motor is on.
C. Depends on the manufacturer.
D. The left side when you sit in the driver's seat and face forward.
The order in which an engine's spark plugs fire is established by the order in which the __________.
A. plugs are mounted in the engine.
B. plug leads are connected to the distributor cap.
C. condenser is connected.
D. contact points are opened.
Auger bits are used to __________.
A. make a dimple in metal to locate the bit as starts to drill.
B. make holes in any surface.
C. make holes in metal.
D. make holes in wood.
A machine screw __________.
A. cannot cut threads in wooden surfaces.
B. is only used for steel building construction.
C. will work with any nut that has the correct diameter.
D. can be used to cut threads in sheet metal.
There are four types of fuel injection used in cars today. They are throttle body injection, multi-port injection, direct injection, and __________.
A. a manual continuous electronic flow injection
B. sequential fuel injection
C. automatic circuitous injection
D. manual intermittent injection
The purpose of the oil pump is to __________.
A. allow excess or dirty gas to be pumped out of the gas tank
B. lubricate the wheels to ensure they keep on rotating
C. reserve oil for the car to run in case the gas tank becomes empty
D. provide lubrication and prevent friction between metal parts of the engine
If a driver inserts the key to start his car and finds that it does not work, then there is a problem with the ignition system.
Seeing that the car has a full tank of gas, the next logical thing to do is __________.
A. replace the gas in the gas tank immediately
B. call a tow truck since there is no possible way of moving the car at that point
C. check the batteries by turning on the lights or radio
D. check to see if the wheels are flat
Which of the following components prevents a car's battery from being overcharged?
A. Rotor
B. Voltage Regulator
C. Inverter
D. Governor