DRAG DROP

What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?

Select and Place:

Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?

A. Outside source static

B. Overload

C. Inside source static

D. PAT

How many total addresses for network, broadcast, and host are provided with the subnet mask 255.255.255.240?

A. 8

B. 16

C. 24

D. 48

A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this requirement?

A. 255.255.255.248

B. 255.255.255.252

C. 255.255.255.254

D. 255.255.255.256

Which flags are used in the TCP header to initiate and end TCP connections or sessions?

A. Initiate = Acknowledge (ACK) End = Synchronize (SYN)

B. Initiate = Acknowledge (ACK) End = Finish (FIN)

C. Initiate = Synchronize (SYN) End = Finish (FIN)

D. Initiate = Finish (FIN) End = Synchronize (SYN)

Which fields are mandatory TLVs in a LLDP PDU frame?

A. System Capabilities and Management Address

B. Chassis ID, Port ID, and Time-to-Live

C. IP Address, Default Gateway, and DNS

D. Port Description, System Name, and System Description

Which message is sent by a router when TTL expires?

A. Echo request

B. Time exceeded

C. Destination unreachable

D. Echo reply

Router A is directly connected to Router B over an Ethernet link. The local interface address for the Router A Fo0/48 interface is 144.254.32.2/24. Which routing table entry is visible on Router A?

A. 144.254.0.0/16

B. 144.254.0.0/24

C. 144.254.32.0/24

D. 144.254.32.2/24

In IPv4, what is the proper conversion from binary to decimal for the number 11010010?

A. 202

B. 210

C. 226

D. 258

What accurately describes OSPF?

A. Interior gateway link-state protocol

B. Exterior gateway distance-vector protocol

C. Interior gateway distance-vector protocol

D. Interior gateway path-vector protocol