When adding an S Series node to a Gen 2 VxRail 240F cluster the build fails.

What could be a possible cause of this situation?

A. IP Pool has no more free addresses

B. Hybrid and Flash nodes cannot be mixed in the same cluster

C. Quanta and Dell hardware cannot be mixed in the same cluster

D. Loudmouth process needs to be restarted

A VxRail deployment has just been completed, and the performance service is enabled, but the vSAN performance statistics are not available for the cluster or virtual machines. What is the reason for this situation?

A. vSAN performance hot-fix has not been applied

B. Monitoring policy has not been created

C. Performance service has not been manually enabled

D. Data has not been populated

Which VxRail node type supports only hybrid storage?

A. S Series

B. E Series

C. G Series

D. V Series

A VxRail deployment has just been completed but the vSAN performance statistics are not available for the cluster or virtual machines. What is the reason for this situation?

A. Data has not been populated

B. Performance service has not been manually enabled

C. vSAN performance hot-fix has not been applied

D. Monitoring policy has not been created

In a VxRail external vCenter deployment, which component(s) are automatically licensed?

A. vCenter only

B. vCenter and vSAN

C. None

D. vSAN only

An all-flash VxRail cluster has just been deployed. When attempting to enable compression, the option is grayed out. What is the cause of this situation?

A. "Add disks to storage" is set to manual

B. Erasure Coding is not enabled

C. Erasure Coding is not disabled

D. "Add disks to storage" is set to automatic

In addition to the VxRail YouTube video, links to what resources should the SE send to the customer, according to the VxRail PEQ Engagement Details worksheet?

A. VxRail vCenter Server Planning Guide VxRail Network Guide

B. VxRail QuickStart Guide VxRail Network Guide

C. VxRail vCenter Server Planning Guide Network Validation Tool

D. VxRail QuickStart Guide Network Validation Tool

How long does it take for the Primary node to be selected for a VxRail deployment after all nodes have been powered on?

A. 5 to 10 minutes

B. 15 to 20 minutes

C. 5 to 10 seconds

D. 15 to 20 seconds

You are expanding the capacity of a Hybrid VxRail by creating an additional disk group. The new disk group will be composed of five drives on all participating cluster nodes. When you attempt to add the new disks to the vSAN datastore you receive an error message about there being no cache tier available.

What is the likely cause?

A. vSAN supports disk groups with four drives or fewer

B. Cluster requires vSAN Advanced or Enterprise license upgrade

C. You attempted to add the disks to the existing disk group

D. All the drives are labeled as HDDs

A VxRail Stretched Cluster deployment will have E560F node. The Cluster must allow local protection with both erasure coding options at either site. What is the minimum node configuration?

A. 3+3 nodes

B. 4+4 nodes

C. 6+6 nodes

D. 8+8 nodes