DRAG DROP

What is the correct sequence of steps to perform a RASR Factory Reset using an SD card?

Select and Place:

What is a consideration when implementing a custom VDS on a VxRail cluster?

A. Used by multiple clusters managed by a single vCenter instance

B. Supported with external and internal vCenter Servers

C. Supports only four NIC uplinks

D. Supports only two NIC uplinks

What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?

A. FQDN for vCenter Server Host name for VxRail Manager

B. Host name for both vCenter Server and for VxRail Manager

C. FQDN for both vCenter Server and for VxRail Manager

D. Host name for vCenter Server FQDN for VxRail Manager

What is the correct CLI command to collect only the vCenter logs on VxRail Manager?

A. vc-support.sh –v

B. generateFullBundle.py –v

C. vc-support-bundle.sh –c

D. generateLogBundle.py –c

An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible. What procedure would result in the quickest node addition?

A. RASR Factory Image Upgrade

B. Factory Reset

C. VxRail Node Imaging Management

D. Compute node expansion

What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?

A. External vCenter server must be upgraded after the VxRail is upgraded

B. vCenter Server requires a temporary IP address on a different subnet before the upgrade

C. Secure boot must be enabled on the ESXi hosts for a successful upgrade

D. VxRail Manager VM must be changed to the default name to avoid an upgrade failure

A VxRail Test Plan has been completed. What is the protocol for recording the results?

A. With the implementation team, complete each test and document the test date

B. With the implementation team, complete and document each test, test date, and a screenshot of results

C. In front of a customer, complete and document each test, test date, and a screenshot of results

D. In front of a customer, complete each test and document the test date

What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?

A. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodes Data-At-Rest Encryption: Encrypts traffic between VxRail nodes only

B. Data-In-Transit Encryption: Does not require a Key Management Server Data-At-Rest Encryption: Requires a Key Management Server

C. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster

D. Data-In-Transit Encryption: Addresses fear of media theft Data-At-Rest Encryption: Addresses fear of rogue administrators

A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.

Which actions need to be performed?

A. Verify VxRail nodes are racked and connected to the ToR switches Validate the network environment

B. Validate that no pending and unfinished jobs are running on the servers Verify that the server and storage components are working properly

C. Validate that the latest updates and patches are installed in the system Validate that no pending and unfinished jobs are running on the servers

D. Verify the configuration settings initially captured in PEQ Validate the storage environment

For which typical activity would the Full data migration setting be used when placing a VxRail host into maintenance mode?

A. Temporary maintenance

B. Rebooting a single ESXi host

C. Shutting down an entire cluster

D. Permanently removing host from cluster