A customer has three 4-node HPE 3PAR arrays. Two of the arrays are deployed at a primary site, and the third array is deployed at a disaster recovery site. Both arrays at the primary site are replicated to the single array at the disaster

recovery site.

All replication is asynchronous periodic. All arrays are utilizing 4 RCIP links for replication.

The customer needs to add a third array at the primary site. They would like to use the existing array at the disaster recovery site as a replication target for this additional array.

What must the architect consider to meet this customer requirement?

A. A single pair of RCIP ports on one array can have a Remote Copy relationship with up to two other arrays

B. Remote Copy fan-in ratios of greater than 2:1 are only supported with RCIP when using 10 Gb Ethernet links

C. Arrays involved in a Remote Copy relationship must have the same number of node pairs

D. Asynchronous streaming replication must be used for Remote Copy fan-in ratios greater than 2:1

How does the HPE Nimble Storage product strategy support a customer's investment protection requirements for today and the future?

A. by supporting replication with arrays from other vendors

B. by supporting the implementation of third party cache, spinning media, and flash media

C. by supporting replication between current and previous-generation array models

D. by supporting the repurposing of obsolete array controllers as high-density servers

A customer has two sites within a short distance. They require a primary storage solution which supports automatic failover for their block storage, SMB shares, and NFS home directories. Which HPE solution best fits the customer's requirements?

A. HPE 3PAR

B. HPE Nimble

C. HPE Simplivity

D. HPE StoreOnce

A customer needs to analyze performance and capacity of their storage environment. Their environment consists of HPE 3PAR, EMC VNX, and Pure Systems. Which tool should you use to begin your assessment of their environment?

A. HPE Infosight

B. DD Analyzer

C. NinjaCrawler

D. SAF Collect

A customer needs a data recovery solution for their HPE 3PAR array. They have the following requirements: RPO needs to be within three hours RTO needs to be within three hours There is no need for offsite data archive They will have a limited maintenance window

Which solution meets all of the customer needs?

A. HPE 3PAR StoreServ with RMC

B. HPE StoreOnce

C. HPE StoreAll

D. HPE StoreEver

Refer to the exhibit.

A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression. Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?

A. This data is a good candidate for HPE 3PAR deduplication

B. This data has a video data workload profile

C. This data is from an HP-UX system

D. This data has a block size which is not optimal for HPE 3PAR

You are discussing a HPE 3PAR Remote Copy solution with your customer. The customer has had a bad experience in their current non-HPE replication solution. Currently the source and target volume properties on the array must be

identical on both sides and cannot be changed without re-creating the volumes.

What should you explain to the customer?

A. Source and target disk type and RAID level can be different and adapted to changing requirements

B. On the target array volumes can be pinned into cache for maximum flexibility

C. All data from the source array will automatically be replicated to the target array using AI to determine the best location where to store the data

D. Flash data can only be replicated to flash media on the target array, while spinning media can be replicated to flash media

Refer to the exhibit.

A customer is planning a new compute cluster. They require business continuity, and they need automatic transparent failover between sites with an RPO of 0. You propose HPE 3PAR 9450 arrays at each site. The displayed Bill of Materials

(BOM) shows the hardware and software components for one site.

What must be added to the BOM at each site to build the solution?

A. four additional HPE 3PAR 9000 4-port 16Gb Fiber Channel Host Bus Adapters

B. one HPE 3PAR All-inclusive Multi-system Software Suite

C. one HPE 3PAR Policy Manager Software license

D. two additional HPE 3PAR 9000 2-port 10Gb Ethernet Host Bus Adapters

A customer has two HPE Nimble arrays that are replication partners. The replication schedule is set to every hour.

After replication completed at 1:00pm, the array at the primary site suffers a power failure.

Applications were failed over successfully by the administrators, and production continued on the secondary site array as designed.

At 3:00pm, the power was restored to the primary site array.

What does the administrator need to do first to restore services in the primary site?

A. Perform handover from the secondary array to the primary array

B. Create a new replication partnership from the primary array to the secondary array

C. Create a new replication partnership from the secondary array to the primary array

D. Perform a failback of the existing replication partnership to the primary array

You are starting an assessment to design a new multi-storage environment for a customer. You have collected data on all the current arrays using SAF collector. What should be the next step in your design process?

A. Open the .zip file with NinjaSTARS

B. Import the .zip file into OCA

C. Send the .zip file to OCAImport@hpe.com

D. Upload the .zip file to the SAF Portal