A network administrator wants to apply a critical PoE priority to any ArubaOS switch port that connects to an Aruba AP. The priority should be applied dynamically based on LLDP messages received from the AP. Which step should the administrator take to meet this goal?

A. Configure the PoE usage setting on all ports as //dp.

B. Configure the PoE usage setting on all ports as class and make sure that Aruba APs are defined as Class 4 devices.

C. Enable the default AP profile bound to the Aruba AP device type.

D. Enable LLDP IVIED TLV extensions on the switch port.

Which solution provides firmware update automation for Aruba APs and switches?

A. Aruba CIearPass

B. Aruba Virtual Switching Framework (VSF)

C. Aruba Activate

D. Aruba AirWave

Which devices must support Multi-User Multiple Input Multiple Output (ML) MIMO) in order for an AP to transmit to multiple clients simultaneously?

A. all of the APs in a WLAN, but none of the clients

B. the transmitting AP and at least one of the clients that receives simultaneous transmissions

C. the transmitting AP and all of the clients

D. the transmitting AP and all of the clients that receive simultaneous transmissions

Refer to the exhibit.

The exhibit shows the physical connection between two Aruba 5400R switches and a server The network administrator is concerned about redundancy and wants to implement a solution like that shown on the right side of the exhibit. The administrator plans to use an LACP link aggregation with both links active. What must the administrator do first?

A. Configure an LACP link aggregation between the switches.

B. Enable dynamic link aggregation globally on the switches.

C. Combine the switches into a Virtual Switching Framework (VSF) fabric.

D. Configure the same operational key on both the switches.

A network administrator wants to form a cluster with several Aruba Instant APs (|APs). What must the administrator verify?

A. that all APs are pre-configured with WLANs with the same SSID

B. that all APs are operating on the same radio channel

C. that all APs are the same model

D. that all APs are connected in the same subnet

Refer to the exhibits.

A broadcast packet arrives tagged for VLAN 2 on the lVIember 2 link of Trk2. What does lVIember 2 do'?

A. It forwards the packet over the VSF link to Nlember 1. and then Nlember 1 forwards the packet on its link in Trk1.

B. It uses LACP to communicate with the commander on the VSF link, and then follows the commander directions.

C. It uses a hash to select one ofthe links in Trk1, and then forwards the packet locally or on the VSF link, based on the decision.

D. It forwards the packet on its local link in Trk1.

A company needs a modular switch that can be combined with another modular switch into a single logical fabric. Which ArubaOS switch series meets these criteria?

A. Aruba 2930F Series

B. Aruba 3800 Series

C. Aruba 3810 Series

D. Aruba 5400R Series

A company wants to deploy Aruba Instant APs (|APs) at branch offices and have a configuration

automatically deployed to the APs.

How can network administrators achieve this goal?

A. Set up an Aruba Activate account and upload configuration templates and provisioning rules to it.

B. Set up configuration templates on AirWave and Aruba Activate provisioning rules that direct the Aps to AirWave.

C. Configure Aruba CIearPass to discover the APs and push configurations to them.

D. Upload a configuration template on a management station and then connect that station to the Instant SSID.

An Aruba Virtual Switching Framework (VSF) fabric has 10GbE interfaces assigned to its VSF link. The

network administrator wants to change the link to use 40GbE interfaces.

Which procedure follows the best practices and requirements to set up the VSF links?

A. Shut down the standby member, remove the VSF link, and then re-create the link with only 40GbE interfaces.

B. Add the 40GbE interfaces to the VSF link, and then remove the 10GbE interfaces from the link Create an LACP link aggregation on the 40GbE interfaces, and then add them to the VSF link.

C. Create a second VSF link that uses the 40GbE interfaces, and then remove the first VSF link.

Which Aruba solution can push a configuration to a factory default device connected to the network?

A. AirWave

B. C|oudVirtuaIization

C. Virtual Switching Framework (VSF)

D. Intelligent IVIanagement Center