A company has an SAP Business One system that runs on SUSE Linux Enterprise Server 12 SP3. The company wants to migrate the system to AWS An SAP solutions architect selects a homogeneous migration strategy that uses AWS Application Migration Service (CloudEndure Migration)
After the server migration process is finished the SAP solutions architect launches an Amazon EC2 test instance from the R5 instance family. After a few minutes the EC2 console reports that the test instance has failed an instance status check Network connections to the instance are refused
How can the SAP solutions architect solve this problem?
A. Reboot the instance to initiate instance migration to another host
B. Request an instance limit increase for the AWS Region where the test instance is being launched
C. Create a ticket for AWS Support that documents the test server instance ID Wait for AWS to update the host of the R5 instance
D. Install the missing drivers on the source system Wait for the completion of migration synchronization Launch the test instance again
A company is planning to move to AWS. The company wants to set up sandbox and test environments on AWS to perform proofs of concept (POCs) Development and production environments will remain on premises until the POCs are completed.
At the company's on-premises location SAProuter is installed on the same server as SAP Solution Manager. The company uses SAP Solution Manager to monitor the entire landscape The company uses SAP router to connect to SAP Support The on-premises SAP Solution Manager instance must monitor the performance and server metrics of the newly created POC systems on AWS. The existing SAP router must be able to report any issues to SAP
What should an SAP solutions architect do to set up this hybrid infrastructure MOST cost- effectively''
A. Install a new SAP Solution Manager instance and a new SAP router instance m the AWS environment Connect the POC systems to these new instances Use these new instances m parallel with the on-premises SAP Solution Manager instance and the on- premises SAP router instance
B. Install a new SAP Solution Manager instance and a new SAP router instance in the AWS environment install the Amazon CloudWatch agent on all on-premises instances Push the monitoring data to the new SAP Solution Manager instance Connect ail on- premises systems and POC systems on AWS to the new SAP Solution Manager instance and the new SAP router instance Remove the on-premises SAP Solution Manager instance and the on-premises SAP router instance Use the new instances on AWS
C. Use AWS Site-to-Site VPN to connect the on-premises network to the AWS environment Connect the POC systems on AWS to the on-premises SAP Solution Manager instance and the on-premises SAP router instance
D. Add the POC systems on AWS to the existing SAP Transport Management System that is configured m the on-premises SAP systems
A company wants to migrate its SAP landscape from on premises to AWS
What are the MINIMUM requirements that the company must meet to ensure full support of SAP on AWS? (Select THREE.)
A. Enable detailed monitoring for Amazon CloudWatch on each instance in the landscape
B. Deploy the infrastructure by using SAP Cloud Appliance Library
C. Install configure and run the AWS Data Provider for SAP on each instance m the landscape
D. Protect all production instances by using Amazon EC2 automatic recovery
E. Deploy the infrastructure for the SAP landscape by using AWS Launch Wizard for SAP
F. Deploy the SAP landscape on an AWS account that has either an AWS Business Support plan or an AWS Enterprise Support plan
An SAP solutions architect is using AWS Systems Manager Distributor to install the AWS Data Provider for SAP on production SAP application servers and SAP HANA database servers The SAP application servers and the SAP HANA database servers are running on Red Hat Enterprise Linux.
The SAP solutions architect chooses instances manually m Systems Manager Distributor and schedules installation. The installation fails with an access and authorization error related to Amazon CloudWatch and Amazon EC2 instances.
There is no error related to AWS connectivity.
What should the SAP solutions architect do to resolve the error?
A. Install the CloudWatch agent on the servers before installing the AWS Data Provider tor SAP
B. Download the AWS Data Provider for SAP installation package from AWS Marketplace Use an operating system super user to install the agent manually or through a script
C. Create an IAM role Attach the appropriate policy to the role Attach the role to the appropriate EC2 instances
D. Wait until Systems Manager Agent is fully installed and ready to use on the EC2 instances Use Systems Manager Patch Manager to perform the installation
A company hosts an SAP HANA database on an Amazon EC2 instance in the us-easi-1 Region. The company needs to implement a disaster recovery (DR) site in the us-west-1 Region. The company needs a cost-optimized solution that offers a guaranteed capacity reservation an RPO of less than 30 minutes and an RTO of less than 30 minutes.
When solution will meet these requirements?
A. Deploy a single EC2 instance to support the secondary database in us-west with additional storage Use this secondary database instance to support QA and production Configure the primary SAP HANA database in us-east-1 to constantly replicate the data to the secondary SAP HANA database in us-west-t by using SAP HANA system replication with preload off During DR shut down the QA SAP HANA instance and restart the production services at the secondary site
B. Deploy a secondary staging server on an EC2 instance in us-west-1 Use CloudEndure Disaster Recovery to replicate changes at the database level from us-east-1 to the secondary staging server on an ongoing basis During DR, initiate cutover increase the size of the secondary EC2 instance to match the primary EC2 instance and start the secondary EC2 instance
C. Set up the primary SAP HANA database in us-east-1 to constantly replicate the data to a secondary SAP HANA database in us-west-1 by using SAP HANA system replication with preload on Keep the secondary SAP HANA instance as a hot standby that rs ready to take over in case of failure
D. Create an SAP HANA database AMI by using Amazon Elastic Block Store (Amazon EBS) snapshots Replicate the database and log backup files from a primary Amazon S3 bucket in us-east-1 to a secondary S3 bucket m us-west-1 During DR launch the EC2 instance in us-west-1 based on AMIs that are replicated Update host information Download database and log backups from the secondary S3 bucket Perform a point-in-time recovery
A company is planning to deploy a new SAP NetWeaverABAP system on AWS with an Oracle database that runs on an Amazon EC2 instance. The EC2 instance uses a Linux- based operating system. The company needs a database storage solution that provides flexibility to adjust the IOPS regardless of the allocated storage size.
Which solution will meet these requirements MOST cost-effectively?
A. General Purpose SSD (gp3) Amazon Elastic Block Store (Amazon EBS) volumes
B. Amazon Elastic File System (Amazon EFS) Standard-Infrequent Access (Standard-IA) storage class
C. Amazon FSx for Windows File Server
D. Provisioned IOPS SSD (io2) Amazon Elastic Block Store (Amazon EBS) volumes
A company is hosting an SAP HANA database on AWS. The company is automating operational tasks including backup and system refreshes. The company wants to use SAP HANA Studio to perform data backup of an SAP HANA tenant database to a backint interface. The SAP HANA database is running in multi-tenant database container (MDO mode. The company receives the following error message during an attempt to perform the backup.
What should an SAP solutions architect do to resolve this issue?
A. Set the execute permission for AWS Backint agent binary aws-backint-agent and for the launcher script aws-backint-agent-launcher sh in the installation directory
B. Verify the installation steps Create symbolic links (symlinks)
C. Ensure that the cataiog_backup_using_backint SAP HANA parameter is set to true Ensure that the data_backup_parameter_file and log_backup_parameter_file parameters have the correct path location in the global ini file
D. Add the SAP HANA system to SAP HANA Studio Select multiple container mode and then try to initiate the backup again
A global retail company is running its SAP landscape on AWS Recently the company made changes to its SAP Web Dispatcher architecture The company added an additional SAP Web Dispatcher for high availability with an Application Load Balancer (ALB) to balance the load between the two SAP Web Dispatchers
When users try to access SAP through the ALB the system is reachable However the SAP backend system is showing an error message An investigation reveals that the issue is related to SAP session handling and distribution of requests . The company confirmed that the system was working as expected with one SAP Web Dispatcher. The company replicated the configuration of that SAP Web Dispatcher to the new SAP Web Dispatcher
How can the company resolve the error?
A. Maintain persistence by using session cookies Enable session stickiness (session affinity) on the SAP Web Dispatchers by setting the wdisp/HTTP/esid_support parameter to True
B. Maintain persistence by using session cookies Enable session stickiness (session affinity) on the ALB
C. Turn on host-based routing on the ALB to route traffic between the SAP Web Dispatchers D. Turn on URL-based routing on the ALB to route traffic to the application based on URL
A company is moving to the AWS Cloud gradually. The company has multiple SAP landscapes on VMware The company already has sandbox development and QA systems on AWS The company's production system is still running on
premises. The company has 2 months to cut over the entre landscape to the AWS Cloud The company has adopted a hybrid architecture for the next 2 months and needs to synchronize its shared file systems between the landscapes These shared file systems include trans directory mounts, /software directory mounts, and third-party integration mounts in the on-premises landscape the company has NFS mounts between the servers On the AWS infrastructure side the company is using Amazon Elastic File System (Amazon EFS) to share the common files
An SAP solutions architect needs to design a solution to schedule transfer of these shared files bidirectional^ four times each day. The data transfer must be encrypted Which solution will meet these requirements?
A. Write an rsync script Schedule the script through cron for four times each day in the on- premises VMware servers to transfer the data from on premises to AWS
B. Install an AWS DataSync agent on the on-premises VMware platform Use the DataSync endpoint to synchronize between the on-premises NFS server and Amazon EFS on AWS
C. Order an AWS Snowcone device Use the Snowcone device to transfer data between the on-premises servers and AWS
D. Set up a separate AWS Direct Connect connection for synchronization between the on- premises servers and AWS
A company is running SAP ERP Central Component (SAP ECC) with a Microsoft SQL Server database on AWS A solutions architect must attach an additional 1 TB Amazon Elastic Block Store (Amazon EBS) volume. The company needs to write the SQL Server database backups to this EBS volume before moving the database backups to Amazon S3 for long-term storage.
Which EBS volume type will meet these requirements MOST cost-effectively?
A. Throughput Optimized HDD (st1)
B. Provisioned IOPS SSD (io3)
C. General Purpose SSD (gp3)
D. Cold HDD (sc1)