Avaya Ethernet Routing Switch Implementation and Maintenance Exam: 3605

To confirm that routed split Multi-Link Trunking (RSMLT0 will work on a set of VLANs, which network design aspect should be considered?

A. RSMLT is enabled on each SMLT VLAN on which the function is required.

B. RSMLT is enabled on the VLAN group.

C. Router 1 always owns the network.

D. RSMLT is enabled on all SMLT VLANs.

A technician discovers that an Ethernet Routing Switch (ERS) 8300 cat5e copper link is intermittent. The link connects a distant workstation to 8348GTX port 6/2. The cable path is undetermined at this point and it is suspected to traverse many patch panels. How can the ERS 8300 Time Domain reflectometer tool be of help in this situation?

A. The Virtual Circuit Test command config ethernet 6/2 vct test can detect opens, shorts, bad terminations.

B. The virtual circuit Repair command config ethernet 6/2 vct repair can detect the bad cable pairs and repair the cable by moving data to the good cable pairs.

C. The Virtual Circuit Echo command config ethernet 6/2 vct echo can detect the bad cable pairs only when connected to another ERS 8300.

D. The Virtual Circuit Detect command config ethernet 6/2 vct detect can detect how many patch panels are used between the device and switch and provide a percentage of dropped packets.

The attempt to manage an Ethernet Routing Switch (ERS) 8600 using a VRRP address was unsuccessful. What is causing this problem?

A. The fie virtual router identifier is 0.

B. The datacenter interface is set as a critical IP interface.

C. A real IP address is required for management access not a VRRP address.

D. The incorrect MAC offset is configured for the VRRP address.