Certified Wireless Design Professional: CWDP-303

When performing an active site survey in an existing WLAN infrastructure, in addition to gathering throughput data, what other important function will you typically be testing at the same time?

A. Application filtering

B. Internet bandwidth

C. Roaming

D. ACL configuration

Using a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined?

A. All APs share a virtual IP address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

B. All APs share a virtual Multicast Address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

C. All APs share a virtual BSSID. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

D. The client selects the AP based on a known set of MAC to BSSID mappings stored in the clients authorized SSID listing.

You are validating association capabilities from clients to an 802.1X/EAP secure SSID. The RADIUS server's IP address is 10.100.50.25 and the default RADIUS authentication port is used. When testing them, none of the clients are able to associate to the SSID. Troubleshooting the WLAN infrastructure, you found out that the server is up and the RADIUS service is up as well, but the authenticator is not able to communicate properly with the server. What's your next troubleshooting step?

A. Verify that the shared secret between the authenticator and the RADIUS server is correct

B. Reboot the clients

C. Reboot the server

D. Restart the RADIUS service